Polk Audio RC55i RC55i Mounting Template - Page 1
Polk Audio RC55i Manual
View all Polk Audio RC55i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
polkaudio the speaker specialists- RC55i Mounting Template Follow these steps before installing the RC55i. 1) Determine speaker location. Be sure that it does not interfere with studs/joists. 2) Hold or tape the template to the mounting location. Be sure the template is level. 3) Trace along the outside of the template. 4) Carefully cut a hole ensuring that it is no larger than the shape you traced. 5) Remove the speaker grilles. 6) Attach the speaker wires to the spring clips on the back of the speaker. Use RED for the positive (+) wire and BLACK for the negative (-) wire. 7) Loosen the six screws until the wall clamps swing freely. 8) Rotate the six mounting clamps inward and insert the speakers into the wall opening. 9) Level the speakers and tighten the six screws until snug. CAUTION: DO NOT OVER-TIGHTEN SCREWS! 10) Reinstall grilles. Refer to owner's manual for further installation instructions. K_