Polk Audio SB1 Plus Omni SB1 Plus Soundbar - Polk Audio - Page 4

Back: VoiceAdjust™ Technology 1. Power Connection-The bar power cable connects here. 2. Audio Inputs (Source 1 Optical, 2 AUX/Bluetooth, or 3 Wi-Fi)- Where you connect your TV (or other sources) to the sound bar. Source 3 (Wi-Fi) is a wireless connection. For "wired" connections, use the 6' optical cable (Source 1) provided or 1/8" analog cable (also used by Bluetooth adapter) (Source 2) provided. Use the USB charging port for any USB powered device (ex. Bluetooth adapter, smartphone, tablet, iPod, etc.), for manual firmware updates via a USB flash drive, or to create a hard-wired Ethernet connection using a USB Ethernet adapter. Your SB1 Plus Sound Bar Sound bar has a dedicated center channel, which you control from either the bar or the remote control. By controlling the volume of the center channel, you can make movie or television dialogue louder and more intelligible. 3. IR Input- Use for a wired IR pass-through (cable sold separately) 4. Sub Out- Hard wire sub connection 5. S YNC-The SYNC button ensures the subwoofer and bar are communicating with each other. Note: If the SB1 Plus system ever loses power, the system will default to "Standby" when power is restored. Wireless Rear Surround Speaker Technology The SB1 Plus comes with built-in wireless rear surround speaker technology. Just connect the sound bar to any pair of Play-Fi speakers and enjoy a true 5.1 home theater experience. (App and firmware update required). Included Bluetooth Adapter Subwoofer Controls 1. Power Switch-Turns the wireless subwoofer on or off, but you can leave it on all the time if you wish. 2. Power Connection-The subwoofer power cord connects here. The SB1 Plus comes with a separate Bluetooth adapter (must be plugged into both USB and Aux IN ports) so you can switch between Wi-Fi and Bluetooth in seconds-play audio from even more online sources from your phone, tablet or computer without having to use the Polk Omni app and restream it to any Play-Fi speaker on your network. The status light on the wireless subwoofer indicates the following: a. Green Steady-The bar and subwoofer are connected. b. G reen Slow Blinking-The subwoofer is searching for the bar. c. G reen Fast Blinking-The subwoofer is in the process of connecting with the bar. a. Red Steady-The subwoofer is in standby mode. IR Remote Learning Set Up Your TV's IR Remote Control For SmartBar™ Learning Note: For your sound bar to respond to your remote control, you MUST FIRST program the bar to respond to your television's original IR (Infra-Red) remote. An RF (Radio Frequency) remote will not work. Other remotes (cable, satellite) will work only after you have programmed the bar to respond to the TV's IR remote. b. Red Blinking-The subwoofer is in protection mode. Programming Instructions: Your sound bar is currently programmed to respond to the remote Remote Control Power- Turns on the bar or puts it in standby mode. Mute- Mutes and unmutes the sound coming from the sound bar. Source 1, 2, WiFI - Changes which input source you are listening to. Master Volume Up and Down ( + / - ) control that is included with the product. However, we strongly recommend programming the sound bar to also respond to your existing remote control using the steps illustrated below. This will enable you to operate all of your components using a single remote control. While programming the sound bar, ignore anything that may be displayed on the TV screen. Example: To teach your bar the "Volume Up" command of your remote control. Adjusts the master volume of the system. 1. T he Sound Bar is turned on and the LED is dim red, and Center Volume Up and Down ( + / - ) you have sound coming from the bar. Adjusts the volume of the center channel. SUB Volume Up and Down ( + / - ) 2. P ress and hold the "SOURCE/LEARN" button (on either the bar or the included remote) for 5 seconds. LEDs 3, 5, Adjusts the volume of the subwoofer. 7, 9, 11 pulse. Movie/Music Select-Tailors the audio 1. www.polkaudio.com for either movies or mu sic. 4