Polk Audio Striker Pro Zx Striker Pro Zx Manual - Page 4
Select Microphone Level Menu. - ps4
View all Polk Audio Striker Pro Zx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
PS4 Use the 1 m console cable and connect it from the Striker Pro into the in-line volume control with mic attenuator device. Then, connect it into the 3.5 mm input jack on the PlayStation® Dualshock 4 controller (please make sure the headphone plug is pushed all the way in). Use the following instructions to route all audio output to headset: 1. P ress and hold the home button for 3 seconds (Mic Boost should be off), then select "Adjust Devices" and press the "X" button. 2. S elect "Output to Headphones" and press the "X" button. 3. Choose "All Audio" and press the "X" button. 4. S elect in-line volume control with mic attenuator (Headphones). 5. Select Microphone (Level Menu). Note: To adjust the microphone level, go to "Settings," then "Device Settings," then "Audio Devices" and adjust the microphone level. Wii U Use the 1 m console cable and connect it from the Striker Pro into the 3.5 mm input jack on the WiiU controller (please make sure the headphone plug is pushed all the way in). 4