Poulan LTT354 User Manual - Page 7
Lower Chute See Fig. 5, Upper Chute, See Figs. 6a & 6b, Level Mower
![]() |
View all Poulan LTT354 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5 LOWER CHUTE (See Fig. 5) 1. Raise and hold deflector shield in upright position. 2. Place slot in lower chute over tab on mower and position lower chute over mower opening as shown. 3. Hook rear latch into flange hole on back of mower. 4. Hook front latch into hole in front gauge wheel bracket or under gauge wheel bracket on mower without a hole in bracket. CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation. DEFLECTOR SHIELD 6 UPPER CHUTE (See Figs. 6A & 6B) 1. Lower mower to its lowest cutting position. 2. Assemble upper chute by inserting curved end into hole in back of cover. NOTE: Handle carefully so as not to damage full bagger indicator. 3. Push in and turn upper chute until it is in line with lower chute. 4. Align the bosses on lower chute with alignment slots on upper chute and slide together. 5. Secure with rubber latch by hooking hole in latch over latch pin. COVER UPPER CHUTE FULL BAGGER INDICATOR HANDLE 03029 TAB LOWER CHUTE FIG. 6A ALIGNMENT SLOT 02783 LATCH PIN REAR LATCH GUAGE WHEEL BRACKET 03023 RUBBER LATCH BOSSES FIG. 6B FRONT LATCH FIG. 5 7 LEVEL MOWER • Be sure mower is properly leveled for best mower performance. See your tractors owner's manual for instructions 7
![](/manual_guide/products/poulan-ltt354-user-manual-ad7fe38/7.png)