Poulan P3314 User Manual - Page 19
Trouble, Cause, Remedy - troubleshooting
View all Poulan P3314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
TROUBLESHOOTING TABLE WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit. TROUBLE CAUSE REMEDY Engine will not start or will run only a few seconds after starting. 1. Ignition switch off. 2. Engine flooded. 3. Fuel tank empty. 4. Spark plug not firing. 5. Fuel not reaching carburetor. 1. Move ignition switch to ON. 2. See "Difficult Starting" in Operation Section. 3. Fill tank with correct fuel mixture. 4. Install new spark plug. 5. Check for dirty fuel filter; replace. Check for kinked or split fuel line; repair or replace. Engine will not idle properly. Engine will not accelerate, lacks power, or dies under a load. Engine smokes excessively. Chain moves at idle speed. 1. Idle speed requires adjustment. 2. Carburetor requires adjustment. 1. Air filter dirty. 2. Spark plug fouled. 3. Chain brake engaged. 4. Carburetor requires adjustment. 1. Too much oil mixed with gasoline. 1. Idle speed requires adjustment. 2. Clutch requires repair. 1. See "Carburetor Adjustment" in the Service and Adjustments Section. 2. Contact an authorized service dealer. 1. Clean or replace air filter. 2. Clean or replace plug and regap. 3. Disengage chain brake. 4. Contact an authorized service dealer. 1. Empty fuel tank and refill with correct fuel mixture. 1. See "Carburetor Adjustment" in the Service and Adjustments Section. 2. Contact an authorized service dealer. 19