Poulan PP4620AVL User Manual

Poulan PP4620AVL Manual

Get Poulan PP4620AVL PDF manuals and user guides View all Poulan PP4620AVL manuals
Add to My Manuals
Save this manual to your list of manuals

Poulan PP4620AVL manual content summary:

  • Poulan PP4620AVL | User Manual - Page 1
    ENGLISH R Instruction Manual Manual de Instrucciones Manuel d'Instructions PP4620AVL ESPAÑOL WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Failure to do so can result in serious injury. ADVERTENCIA: Lea el manual de instrucciones y siga todas las
  • Poulan PP4620AVL | User Manual - Page 2
    instruction manual before using the chain saw. Always wear appropriate ear protection, eye protection and head protection. Always use two hands when operating the chain saw. WARNING! Contacting the guide bar or making repairs except carburetor adjustments. Because a chain saw is a high-speed
  • Poulan PP4620AVL | User Manual - Page 3
    from your body, and the guide bar and chain to the rear, preferably covered with a scabbard. MAINTAIN YOUR SAW IN GOOD WORKING ORDER S Have all chain saw service performed by a qualified service dealer with the exception of the items listed in the maintenance section of this manual. For example, if
  • Poulan PP4620AVL | User Manual - Page 4
    branch, do not let the guide bar contact branch or other objects around it. S Keep your saw chain sharp and properly tensioned. A loose or dull chain can increase the chance of kickback occurring. Follow manufacturer's chain sharpening and maintenance instructions. Check tension at regular intervals
  • Poulan PP4620AVL | User Manual - Page 5
    eliminate this danger. As a chain saw user, do not rely only on safety devices. You must follow all safety precautions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury. S Reduced--Kickback Guide Bar, designed with a small radius
  • Poulan PP4620AVL | User Manual - Page 6
    in this manual, use care and good judgement. If you need assistance, contact your authorized service dealer or call 1-800--554--6723. STANDARDS: This saw is listed by Underwriter's Laboratories, Inc., in accordance with: ANSI B175.1- 2000 American National Standards for Gasoline--Powered Chain Saws
  • Poulan PP4620AVL | User Manual - Page 7
    nose of the guide bar. 8. Fit chain drive links in to bar groove. 9. Pull the bar forward until the chain is snug in the groove of the bar. Ensure all drive links are in the bar groove. 10. Hold guide bar against the saw frame and install the chain brake. 11. Replace the chain brake nuts and tighten
  • Poulan PP4620AVL | User Manual - Page 8
    KNOW YOUR SAW READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Chain Adjustment Tool (Bar Tool) Front
  • Poulan PP4620AVL | User Manual - Page 9
    runs at idle speed. If the chain moves at idle speed refer to CARBURETOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns. To stop the engine move the ON/STOP switch to the STOP position. To start the engine hold the saw firmly on the ground as
  • Poulan PP4620AVL | User Manual - Page 10
    hand and the front handle with your left hand. Hold the chain saw approximately 14″ (35 cm) above a stump or other wooden surface. Release your grip on the front handle and use the weight of the saw to let the tip of the guide bar fall forward and contact the stump. When the tip of
  • Poulan PP4620AVL | User Manual - Page 11
    engine can result. S Release the throttle trigger as soon as the cut is completed, allowing the engine to idle. If you run the saw at full throttle without a cutting load, unnecessary wear can occur to the chain, bar, and engine. S To avoid losing control when cut is complete, do not put pressure on
  • Poulan PP4620AVL | User Manual - Page 12
    cut when necessary to control the direction of fall. To avoid kickback and chain damage, use wood or plastic wedges, but never steel or iron wedges. the log. S Finish with your second cut. Using a log for support 2nd Cut Turn saw OFF and use a plastic or wooden wedge to force cut open. Overcutting
  • Poulan PP4620AVL | User Manual - Page 13
    support stand 2nd Cut 1st Cut Using a support stand 1st Cut 2nd Cut LIMBING AND PRUNING WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar struck by the branch or the saw when the tension in the wood
  • Poulan PP4620AVL | User Manual - Page 14
    loose caps Before each use For loose fasteners . . . Before each use For loose parts Before each use Inspect and Clean: Bar Before each use Complete saw After each use Air filter Every 5 hours* Chain brake Every 5 hours* Spark arresting screen and muffler Every 25 hours* Replace spark plug
  • Poulan PP4620AVL | User Manual - Page 15
    3 screws. Tighten securely. CARBURETOR ADJUSTMENTS WARNING: The chain will be mov- ing authorized service dealer or call 1--800--554--6723. BAR MAINTENANCE If your saw cuts guide bar specified for your saw in the repair parts list or on the decal located on the chain saw. CHAIN SHARPENING Chain
  • Poulan PP4620AVL | User Manual - Page 16
    and Adjustments Section. 2. Contact an authorized service dealer. Engine will not accelerate, lacks power, or dies under a load. 1. Air filter dirty. 2. Spark plug fouled. 3. Chain brake engaged. 4. Carburetor requires adjustment. 1. Clean or replace air filter. 2. Clean or replace plug and regap
  • Poulan PP4620AVL | User Manual - Page 17
    , chain sharpening, bars, chains, and other parts which wear and require replacement with reasonable use during the warranty period. This warranty does not cover predeliv- ery set--up, installation of guide bar and chain, and normal adjustments explained in the instruction manual such as carburetor
  • Poulan PP4620AVL | User Manual - Page 18
    warranty. EMISSION CONTROL WARRANTY PARTS LIST: Carburetor, Ignition System: Spark Plug (covered up to maintenance schedule), Ignition Module. MAINTENANCE STATEMENT: The owner is responsible for the performance of all required maintenance as defined in the in- struction manual. The information on
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
PP4620AVL
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
ENGLISH
ESPAÑOL
FRANÇAIS
545047542
5/27/05
R
Electrolux Home Products, Inc.
1030 Stevens Creek Road
Augusta, GA 30907
Electrolux Canada Corporation
6150 McLaughlin Road
Mississauga, Ontario L5R 4C2
Copyright
E
2005 Electrolux Home Products, Inc.
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions