Poulan PPB40T Owner Manual - Page 5

SAFETY RULES WARNING: READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. WARNING: When using this device, safety precautions must be followed. For your own safety and that of bystanders, please read these instructions before operating the device. Do not use the device without reading the instruction manual. OPERATOR SAFETY • This string trimmer is designed for cutting grass and soft vegetation, as well as edging in areas not accessible with a lawn mower. • This string trimmer is not designed for cutting hedges, shrubs, bushes, flowers, or for composting purposes. • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate string trimmer in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. • Keep children and bystanders away while operating string trimmer. Distractions can cause you to lose control. • Do not expose string trimmer to rain or wet conditions. • Restrict the use of this unit to people who read, understand, and follow unit and manual warnings and instructions. • Children should be supervised to ensure that they do not play with the device. • Never allow children or people unfamiliar with the instructions use the device. • Turn the string trimmer off while people, children, or pets are nearby. • Only use the string trimmer in daylight or good artificial light. • Before using the device and after any impact, check for signs of wear or damage and repair as necessary. • Never operate without guard, or with damaged guard. • Keep hands and feet away from trimmer cutting line at all times, especially when turning the unit on. • Take care against injury from any device fitted for trimming the cutting line length. After extending new cutting line always return the device to its normal operating position before switching on. • Never use replacement parts or accessories not provided or recommended by the manufacturer. • Disconnect battery pack from tool before making any adjustments, changing accessories, or storing the tool. Such preventative safety measures reduce the risk of starting the tool accidentally. • Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. • Always ensure that ventilation openings are kept clear of debris. • Dress Properly. Do not wear loose clothing or jewelery. Contain long hair. Keep your hair, clothing, and hands away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. • Always wear eye protection, that comply with ANSI Z87.1. • Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. • Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations. • Stay Alert. Do not operate string trimmer when you are tired, ill, or under the influence of alcohol, drugs, or medication. • Store the string trimmer indoors - out of reach of children. • Do not charge or operate cordless tools in damp or wet locations or in the rain. Following this rule will reduce the risk of electric shock. • Keep all bystanders, children, and pets at least 50 ft. away. • Use Right Tool - Do not use tool for any job except that for which it is intended. • Avoid Unintentional Starting - Do not carry string trimmer with fingers on the switch. Be sure the battery is removed while transporting. • Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. • Maintain tool with care. Keep vents clean for best and safest performance. Follow instructions for proper maintenance. Do not attempt to clear clogs from tool without first disconnecting the battery. • Check Damaged Parts - Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, 5