Poulan PPR17H42STA User Manual - Page 14

Mowing

Page 14 highlights

OPERATION MOWING TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trimming. • Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting. • When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 9). • If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clippings. Make first cut relatively high; the second to the desired height. • Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing. • Always operate engine at full throttle when mowing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting performance as well as the quality of cut desired. • When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used. ir , FIG. 9 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

OPERATION
MOWING
TIPS
Tire
chains
cannot
be
used
when
the
mower
housing
is
attached
to
tractor.
Mower
should
be
properly
leveled
for
best
mowing
performance.
See
"TO
LEVEL
MOWER
HOUSING"
in
the
Service
and
Adjustments
section of
this
manual.
The
left
hand
side
of
mower
should
be
used
for
trim-
ming.
Drive
so
that
clippings
are
discharged
onto
the
area
that
has
been
cut.
Have
the
cut
area
to
the
right
of
the
machine.
This
will
result
in
a
more
even
distribution
of
clippings
and
more uniform
cutting.
When
mowing
large
areas,
start
by
turning
to
the
right
so
that
clippings
will
discharge
away
from
shrubs,
fences,
driveways,
etc.
After
one
or
two
rounds,
mow
in
the
opposite
direction
making
left
hand
turns
until
finished
(See
Fig.
9).
If
grass
is
extremely
tall,
it
should
be
mowed
twice
to
reduce
load
and
possible
fire
hazard
from
dried
clip-
pings.
Make
first
cut
relatively
high;
the
second
to
the
desired
height.
Do
not
mow
grass
when
it is
wet.
Wet
grass
will
plug
mower
and
leave
undesirable
clumps.
Allow
grass
to
dry
before
mowing.
Always
operate
engine
at
full
throttle
when
mowing
to
assure
better
mowing
performance
and
proper
dis-
charge
of
material.
Regulate
ground
speed
by
select-
ing
a
low
enough
gear
to
give
the
mower
cutting
performance
as
well
as
the
quality
of
cut
desired.
When
operating
attachments,
select
a
ground
speed
that
will
suit
the
terrain
and
give
best
performance
of
the
attachment
being
used.
ir
,
FIG.
9
14