Poulan PRRT65A User Manual - Page 3

Table Of Contents

Page 3 highlights

PRODUCT SPECIFICATIONS GASOLINE CAPACITY: OIL(API-SF-SJ) : (Capacity: 20 oz./0.6L) SPARK PLUG : (GAP: .030"/0.76mm) 3 Quarts (2.8L) Unleaded Regular SAE 30 (Above 32°F/0°C) SAE 5w-30 (Below 32°F/0°C) Champion RC12YC CONGRATULATIONS on your purchase of a new tiller. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problems you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit. Please read and retain this manual. The instructions will enable you to assemble and maintain your tiller properly. Always observe the "SAFETY RULES". CUSTOMER RESPONSIBILITIES • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your tiller. • Follow instructions under "Customer Responsibilities" and "Storage" sections of this Owner's Manual. IMPORTANT: THIS UNIT IS EQUIPPED WITH AN INTERNAL COMBUSTION ENGINE AND SHOULD NOT BE USED ON OR NEAR ANY UNIMPROVED FORESTCOVERED, BRUSH-COVERED OR GRASS COVERED LAND UNLESS THE ENGINE'S EXHAUST SYSTEM IS EQUIPPED WITH A SPARK ARRESTER MEETING APPLICABLE LOCAL LAWS (IF ANY). IF A SPARK ARRESTER IS USED, IT SHOULD BE MAINTAINED IN EFFECTIVE WORKING ORDER BY THE OPERATOR. IN THE STATE OF CALIFORNIA, A SPARK ARRESTER IS REQUIRED BY LAW (SECTION 4442 OF THE CALIFORNIA PUBLIC RESOURCES CODE). OTHER STATES MAY HAVE SIMILAR LAWS. FEDERAL LAWS APPLY ON FEDERAL LANDS. SEE YOUR AUTHORIZED SERVICE CENTER/DEPARTMENT FOR SPARK ARRESTER. TABLE OF CONTENTS SAFETY RULES 2 PRODUCT SPECIFICATIONS 3 ASSEMBLY 4-6 OPERATION 7-10 MAINTENANCE SCHEDULE 11 CUSTOMER RESPONSIBILITIES 3,11-13 SERVICE & ADJUSTMENTS 13-16 STORAGE 17 TROUBLESHOOTING 18 REPAIR PARTS-TILLER 19-25 WARRANTY 27 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

3
PRODUCT SPECIFICATIONS
GASOLINE CAPACITY:
3 Quarts (2.8L)
Unleaded Regular
OIL(API-SF-SJ) :
SAE 30 (Above 32°F/0°C)
(Capacity: 20 oz./0.6L)
SAE 5w-30
(Below 32°F/0°C)
SPARK PLUG :
Champion
(GAP:
.030"/0.76mm)
RC12YC
CONGRATULATIONS
on your purchase of a new tiller. It
has been designed, engineered and manufactured to give
you the best possible dependability and performance.
Should you experience any problems you cannot easily
remedy, please contact your nearest authorized service
center.
We have competent, well-trained technicians and
the proper tools to service or repair this unit.
Please read and retain this manual. The instructions will
enable you to assemble and maintain your tiller properly.
Always observe the “SAFETY RULES”.
CUSTOMER RESPONSIBILITIES
Read and observe the safety rules.
Follow a regular schedule in maintaining, caring for and
using your tiller.
Follow instructions under “Customer Responsibilities”
and “Storage” sections of this Owner’s Manual.
IMPORTANT:
THIS UNIT IS EQUIPPED WITH AN
INTERNAL COMBUSTION ENGINE AND SHOULD NOT
BE USED ON OR NEAR ANY UNIMPROVED FOREST-
COVERED, BRUSH-COVERED OR GRASS COVERED
LAND UNLESS THE ENGINE'S EXHAUST SYSTEM IS
EQUIPPED WITH A SPARK ARRESTER MEETING
APPLICABLE LOCAL LAWS (IF ANY).
IF A SPARK
ARRESTER IS USED, IT SHOULD BE MAINTAINED IN
EFFECTIVE WORKING ORDER BY THE OPERATOR.
IN THE STATE OF CALIFORNIA, A SPARK ARRESTER IS
REQUIRED BY LAW (SECTION 4442 OF THE CALIFORNIA
PUBLIC RESOURCES CODE).
OTHER STATES MAY
HAVE SIMILAR LAWS.
FEDERAL LAWS APPLY ON
FEDERAL LANDS.
SEE YOUR AUTHORIZED SERVICE
CENTER/DEPARTMENT
FOR SPARK ARRESTER.
SERVICE & ADJUSTMENTS
..................................
13-16
STORAGE
...................................................................
17
TROUBLESHOOTING
.................................................
18
REPAIR PARTS-TILLER
.........................................
19-25
WARRANTY
................................................................
27
TABLE OF CONTENTS
SAFETY RULES
...........................................................
2
PRODUCT SPECIFICATIONS
.......................................
3
ASSEMBLY
................................................................
4-6
OPERATION
.............................................................
7-10
MAINTENANCE SCHEDULE
.......................................
11
CUSTOMER RESPONSIBILITIES
.......................
3,11-13