Poulan QCT46 User Manual - Page 7

5 LOWER CHUTE - MOWER WITH MOUNTING TAB (See Fig. 5A) 1. Raise and hold deflector shield in upright position. 2. Place slot in lower chute over tab on mower and position lower chute over mower opening as shown. 3. Hook rear latch into flange hole on back of mower. 4. Hook front latch into tab hole on front of mower. • If your tractor is equipped with gauge wheels on the deck, then it will be necessary to hook the rear latch into the hole in the R.H. gauge wheel bracket. CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation. DEFLECTOR SHIELD HINGE BRACKET EXTENDED EDGE "B" Must be under deflector shield and along side the hinge bracket TAB DEFLECTOR SHIELD 03058 REAR GAUGE WHEEL BRACKET WITH REAR GAUGE WHEELS REAR LATCH FRONT LATCH WITHOUT GAUGE WHEELS REAR LATCH FIG. 5A 7