Poulan TE400 User Manual - Page 5

REFILLING THE SPOOL WITH LINE WARNING: Use only 0.080" (2 mm) diameter round line. Other sizes and shapes of line will not advance properly and will result in improper cutting head function or can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause serious injury. S Cut a length of 30 feet of 0.080" (2 mm) di- ameter round Poulan/Weed Eater! brand line. Feed line in direction shown on spool. Spool S Insert one end of line into center cavity of empty spool. Ensure line will feed into spool in the direction shown on the spool (counterclockwise). S Continue feeding line into spool, leaving 4 -6 inches (10 -- 15 cm) unwound from center of spool. INSTALLING SPOOL WITH LINE S Install replacement spool. S Thread line through line guide ring. Line through guide ring Slot Replacement Spool S Rest guide ring on spool and place line in slot. Allow line to extend 4 -- 6 inches (10 -15 cm) from center of spool. S Ensure line remains in slot while screwing cap on to the shaft. Only tighten cap hand tight! SERVICE We recommend all service and adjustments not listed in this manual be performed by an Authorized Service Dealer. CARBURETOR ADJUSTMENTS Your carburetor is equipped with limiter caps. Carburetor adjustment is a complicated task. We recommend that you take your unit to an Authorized Service Dealer. Damage will occur if you turn the needles beyond the limiter stops. IGNITION TIMING The ignition timing is fixed, non-adjustable. SPARK PLUG Replace the spark plug yearly using a Champion RCJ--8Y plug. Spark plug gap is 0.025". NEED ASSISTANCE? Need Assistance? Call 1-800-554-6723. Need Service Parts? Contact your dealer . 5