Poulan WEB160 User Manual - Page 6

STOPPING YOUR UNIT To stop the unit, move the ON/OFF switch to the OFF (0) position. STARTING YOUR UNIT Move the ON/OFF switch to the ON (I) position to turn on the unit. WARNING: Do not use the unit without the blower tube properly attached to avoid flying debris and/or impeller contact which can cause serious injury. Always wear eye protection to prevent rocks or debris from being blown or ricocheting into the eyes and face which can result in blindness or serious injury. OPERATING POSITION Eye Protection BLOWER WARNING: Inspect the area be- fore using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown, or otherwise cause injury or damage during operation. Use your unit as a blower for: D Sweeping debris or grass clippings from driveways, sidewalks, patios, etc. D Blowing grass clippings, straw, or leaves into piles, or removing debris from corners, around joints, or between bricks. Direct air flow by directing the blower tube down or to one side. Always work away from solid objects such as walks, large stones, vehicles, and fences. Clean corners by starting in corners and moving outward. This will help prevent an accumulation of debris which could fly into your face. Be careful when working near plants. The force of the air could damage tender plants. MAINTENANCE WARNING: Disconnect power source before performing maintenance. GENERAL RECOMMENDATIONS The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjustments will need to be made periodically to properly maintain your unit. BEFORE EACH USE CHECK FOR LOOSE FASTENERS AND PARTS S Blower Tube CHECK FOR DAMAGED OR WORN PARTS Contact your authorized service dealer for replacement of damaged or worn parts. S ON/OFF Switch -- Ensure switch functions properly by moving the switch to the OFF position. Make sure motor stops; then restart motor and continue. AFTER EACH USE INSPECT AND CLEAN UNIT & LABELS Stop unit and unplug extension cord. S After each use, inspect complete unit for loose or damaged parts. Clean the unit using a damp cloth. S Wipe off unit with a clean dry cloth. STORAGE WARNING: Perform the following steps after each use: S Stop unit and disconnect from the pow- er source. S Allow motor to cool before storing or transporting. S Store unit with all guards in place. Posi- tion unit so that any sharp object cannot accidentally cause injury. S Store unit unplugged, well out of the reach of children. SEASONAL STORAGE Prepare unit for storage at the end of the season or if it will not be used for 30 days or more. If your blower is to be stored for a period of time: S Stop unit and disconnect from the pow- er source. S Clean the entire unit. S Clean air vents and air inlet of debris. 6