ProForm 12.5qm Treadmill Uk Manual - Page 15
When the program is completed, remove
View all ProForm 12.5qm Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
7 Press the start button or the speed s button to start the program. A moment after the button is pressed, the treadmill will automatically adjust to the first speed setting for the program. Hold the handrails and begin walking. If the user-definable program is selected, the time/incline display will show the elapsed time. If the preset program is selected, the time/incline display will show the time remaining in the program and the time remaining in the current segment of the program. During the program, the console will regularly compare your heart rate to the current target heart rate setting. If your heart rate is too far below or above the target heart rate setting, the speed of the treadmill will automatically increase or decrease to bring your heart rate closer to the target heart rate setting. If the speed reaches the maximum speed limit for the program (see step 6 on page 14) and your heart rate is still too far below the current target heart rate setting, the incline of the treadmill will also increase to bring your heart rate closer to the target heart rate setting. The program will continue until no time remains in the program. The walking belt will then slow to a stop. If the speed or incline setting is too high or too low, you can adjust the setting with the speed or incline buttons. However, each time the console compares your heart rate to the current target heart rate setting, the speed and/or incline of the treadmill may automatically increase or decrease to bring your heart rate closer to the target heart rate setting. If your pulse is not detected during the program, the letters PLS will flash in the calories/watts/heart rate display and the speed and incline of the treadmill may automatically decrease until your pulse is detected. If this occurs, refer to the instructions on page 8. To stop the program at any time, press the stop button. Heart rate programs should not be stopped temporarily and then restarted. To use a heart rate program again, reselect the program and start it at the beginning. 8 Follow your progress with the displays. Refer to step 5 on page 11. 9 When the program is completed, remove the key from the console. Refer to step 5 on page 13. 15