ProForm 14.0 Mme Elliptical English Manual - Page 14
Harness 81 and the Right and Left Pulse Wires
View all ProForm 14.0 Mme Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
13. While a second person holds the Console (3) near the Upright (2), plug the Upper Wire 13 Harness (81) and the Right and Left Pulse Wires 3 (80, 85) into the receptacles on the back of the Console. Insert the excess wire into the Upright. The connectors on the Wires (80, 81, 85) should slide easily into the receptacles and snap into place. If a connector does not slide easily into a receptacle, turn the connector and try again. If you do not connect the connectors properly, the console may become damaged. Tip: Avoid pinching the wires. Attach the Console (3) to the Upright (2) with four M4 x 16mm Screws (67); start all the Screws, and then tighten them. Avoid pinching the wires 80 81 2 85 67 14. Plug the Power Adapter (84) into the receptacle on the front of the elliptical. Note: To plug the Power Adapter (84) into an outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 15. 14 84 15. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be included. Place a mat beneath the elliptical to protect the floor. 14