ProForm 20.0 Crosstrainer Elliptical English Manual - Page 7
Insert the Left and Right Controller Wires 110
View all ProForm 20.0 Crosstrainer Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Hook the front ends of the Frame Covers (105, 106) together. Attach each Frame Cover to the 4 Frame (2) with three M4 x 16mm Self-tapping Screws (79). 79 106 2 79 105 5. Have a second person hold the Upright (6) near the Frame (2) as shown. Pull the Wire Harness (48) out of the Frame (2) and insert it upward through the Upright (6). Do not let the Wire Harness or the Controller Wires (110, 111) fall into the Upright; use a piece of tape or an elastic band to hold the wires in place until step 15. Insert the Left and Right Controller Wires (110, 111) downward into the Frame (2). Pull the Right Controller Wire, which has a tag attached, out of the right side of the Frame. Then, pull the Left Controller Wire out of the left side of the Frame. Insert the Upright (6) into the Frame (2). Attach the Upright with three M8 x 16mm Button Screws (95) and three Star Washers (100). Avoid pinching the Wires (48, 110, 111) between the Upright and the Frame. 5 48 6 111 110 2 100 95 95 100 100 95 Avoid pinching the wires during this step 7