ProForm 280 Razor Instruction Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver wrench , and a rubber mallet . , an adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. To avoid damaging plastic parts, do not use power tools for assembly. M6 Locknut (77)-6 M8 Locknut (82)-4 M6 Split Washer M6 Washer Wave Washer M10 Split (101)-4 (35)-4 (88)-2 Washer (78)-10 M4 x 16mm Round Head Screw (84)-10 M4 x 16mm Screw (94)-14 M6 x 16mm Patch Screw (80)-2 M6 x 18mm Patch Screw (102)-4 M6 x 36mm Button Bolt (76)-4 M6 x 72mm Shoulder Bolt (21)-2 M8 x 38mm Button Bolt (98)-4 M10 x 20mm Button Screw (79)-4 M10 x 41mm Shoulder Screw (63)-2 M10 x 70mm Button Screw (75)-6 5