ProForm 3.9 Uk Manual - Page 7

2. Have a second person orient the Base (48) as shown. Identify the Left Upright (31), which has a large hole near the bend. Orient the Left Upright (31) as shown, and attach it to the Base (48) with two 3/8" x 2 1/4" Bolts (27) and two 3/8" Star Washers (39); do not tighten the Bolts yet. 2 Bend 31 Large Hole 48 39 39 27 3. Orient the Right Upright (36) as shown, and attach it to the Base (48) with two 3/8" x 2 1/4" Bolts (27) and two 3/8" Star Washers (39); do not tighten the Bolts yet. 3 Bend 36 48 39 27 39 4. Set the Base (48) near the front of the treadmil. 4 Cut the tie (not shown) securing the Upright Wire (28) in a bundle. Discard the tie. Locate the long tie in the Right Upright (36). Wrap the tie securely around the connector on the Upright Wire (28), and insert the connector into the large hole in the Right Upright. Then, pull the opposite end of the tie until the Upright Wire is pulled through the Right Upright. 36 36 28 Tie 48 28 7