ProForm 310 E Elliptical English Manual - Page 14
Attach the Right Pedal 13 to the Right Pedal
 |
View all ProForm 310 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
18. Identify the Right Pedal (13), which is marked with a “"Right”" sticker, and orient it as shown. 18 Attach the Right Pedal (13) to the Right Pedal Arm (49) with three M10 x 45mm Screws (75) and three M10 Split Washers (78). Make sure to use the center hole and the two outer holes to attach the Right Pedal. Repeat this step on the other side of the elliptical. 13 49 78 75 19. Make sure that all parts of the elliptical are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical. 14
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
14
18
13
49
78
75
18. Identify the Right Pedal (13), which is marked
with a ²Right³ sticker, and orient it as shown.
Attach the Right Pedal (13) to the Right Pedal
Arm (49) with three M10 x 45mm Screws (75)
and three M10 Split Washers (78).
Make sure to
use the center hole and the two outer holes
to attach the Right Pedal.
Repeat this step on the other side of the
elliptical.
19.
Make sure that all parts of the elliptical are properly tightened.
Note: Some hardware may be left over
after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical.