ProForm 325 Cse Elliptical Uk Manual - Page 13
Then, press a Pedal Arm Cap 74 into the Right
View all ProForm 325 Cse Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
16. Apply a small amount of grease to the axle on the Right Crank Arm (80). 16 Slide the Right Pedal Arm (12) onto the axle on the Right Crank Arm (80). Next, slide an M10 x 28mm Washer (83) onto an M10 x 20mm Screw (40), and tighten the Screw into the axle. Then, press a Pedal Arm Cap (74) into the Right Pedal Arm (12). Grease Repeat this step on the left side of the elliptical. 80 12 83 40 74 17. See assembly steps 4 and 5. Tighten the M10 x 20mm Screws (40) and the M10 x 74mm 17 Bolt (7). Then, press the Top Shield (41) into place. Next, apply a small amount of grease to an M6 Bolt Set (25). Hold the end of the Right Pedal Arm (12) inside the bracket on the right Upper Body Leg (5). Attach the right Upper Body Leg (5) to the Right Pedal Arm (12) with the M6 Bolt Set (25). Repeat this step on the left side of the elliptical. 41 25 5 Grease 25 12 13