ProForm 4.0 Treadmill User Manual - Page 9

8. Press a Front Handrail Endcap (97) into the Left 8 Handrail (35). Attach the Front Handrail Endcap with a #8 x 3/4" Handrail Screw (15). Press an Upright Insert (110) into the Left Upright (74). Set the Left Handrail (35) on the Upright Insert. Attach the Left Handrail (35) with two 3/8" x 1 1/4" Bolts (7) and two 3/8" Star Washers (9). Firmly tighten the Bolts. 35 74 97 15 110 9 7 9. Hold the Right Handrail (33) near the Right Upright (78). Insert the Upright Wire (38) through an Upright Insert (110), into the hole in the bottom of the Right Handrail, and out of the large hole in the side of the Right Handrail. Insert the included plastic tie through the holes in the Right Handrail (33) as shown. Look inside the Right Handrail. Make sure that the plastic tie holds the Upright Wire (38) to the side as shown in the inset drawing. Tighten the plastic tie. Press a Front Handrail Endcap (97) into the Right Handrail (33). Attach the Front Handrail Endcap with a #8 x 3/4" Handrail Screw (15). Attach the Right Handrail (33) with two 3/8" x 1 1/4" Bolts (7) and two 3/8" Star Washers (9). Firmly tighten the Bolts. 10. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the two indicated screws (B) from the Pulse Bar Bottom (95). Discard the screws. 9 15 Large Hole 38 7 Plastic Tie 9 110 33 78 10 B 97 Hole 33 Tie 38 110 Hole 95 Console Assembly 9