ProForm 4.0 X Elliptical English Manual - Page 10
Console Wire
View all ProForm 4.0 X Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
9. The Console (10) can be operated with four "D" batteries (not included); alkaline batteries are recommended. IMPORTANT: If the elliptical exerciser has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the console displays or other electronic components may become damaged. Remove the battery cover from the back of the Console and insert four batteries into the battery compartment. Make sure that the batteries are oriented as shown by the diagram inside the battery compartment. Then, reattach the battery cover. Note: The Console (10) can be also be operated with an optional power supply instead of batteries. To purchase a power supply, call the telephone number on the front cover of this manual. Plug one end of the power supply into the jack on the console. Plug the other end of the power supply into an appropriate outlet that is properly installed in accordance with all local codes and ordinances. 9 10 Battery Cover Batteries 10. Have a second person hold the Console (10) 10 near the Upright (2) as shown. Connect the 10 console wire to the Upper Wire Harness (18). Attach the Console (10) to the Upright (2) with four M4 x 16mm Screws (60). Be careful to avoid pinching the wires. Console Wire 60 2 18 Avoid pinching the wires during this step 10