ProForm 400 Le Elliptical English Manual - Page 19
How To Use A Preset Workout
View all ProForm 400 Le Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
HOW TO USE A PRESET WORKOUT 1. Turn on the console. See step 1 on page 17. 2. Select a preset workout. At the end of each segment of the workout, a series of tones will sound and the next segment of the profile will begin to flash. If a different resistance level is programmed for the next segment, the resistance level will flash in the display for a few seconds to alert you. The resistance of the pedals will then change. To select a preset workout, press the Workouts increase or decrease button repeatedly until the number of the desired workout appears in the right display. When you select a preset workout, the duration of the workout will appear in the left display, the maximum resistance level for the workout will flash in the center display, and the number of the workout will appear in the right display. If the resistance level for the current segment is too high or too low, you can manually override the setting by pressing the Resistance buttons. However, when the current segment ends, the pedals will automatically adjust to the resistance level for the next segment. If you stop pedaling for several seconds, a series of tones will sound and the workout will pause. To restart the workout, simply resume pedaling. The workout will continue until the last segment of the profile flashes and the last segment of the workout ends. After a few seconds, a profile of the resistance levels of the workout will scroll across the center display. Note: If you continue to pedal after the workout is completed, the display will continue to show exercise feedback; however, the display will not show the time until you select the manual mode or a new workout. 4. Follow your progress with the display. See step 4 on page 17. Profile 5. Measure your heart rate if desired. See step 5 on page 18. Note: Complete profiles of the preset workouts are printed on the sides of the console. 3. Begin pedaling to start the workout. Each workout is divided into several one-minute segments. One resistance level is programmed for each segment. Note: The same resistance level may be programmed for consecutive segments. 6. Turn on the fan if desired. See step 6 on page 18. 7. When you are finished exercising, the console will turn off automatically. See step 7 on page 18. During the workout, the workout profile will show your progress (see the drawing above). The flashing segment of the profile represents the current segment of the workout. The height of the flashing segment indicates the resistance level for the current segment. 19