ProForm 425treadmill English Manual - Page 9

Hold the Right Upright 85 against the Base

Get ProForm 425treadmill PDF manuals and user guides View all ProForm 425treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

4. Hold the Right Upright (85) against the Base (95). Be careful not to pinch the Upright 4 Wire (87). Insert two 3/8" x 4" Screws (7) with two 3/8" Star Washers (11) and a 3/8" x 1 1/2" Screw (14) with a 3/8" Star Washer (11) into the Right Upright. Partially tighten the 3/8" x 4" Screws (7) until the heads of the Screws touch the Right Upright (85); do not fully tighten the Screws yet. Partially tighten the 3/8" x 1 1/2" Screw (14). 85 14 11 87 7 11 95 5. With the help of a second person, lift the treadmill so that the Base (95) is flat on the floor. 5  Attach a Wheel (96) to the Base (95) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10). Do not over- tighten the Nut; the Wheel must turn freely. 89 Press a Base Cap (89) into the Base (95). 10 95 8 96 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
9
4.
Hold the Right Upright (85) against the Base
(95).
Be careful not to pinch the Upright
Wire (87).
Insert two 3/8" x 4" Screws (7) with
two 3/8" Star Washers (11) and a 3/8" x 1 1/2"
Screw (14) with a 3/8" Star Washer (11) into the
Right Upright.
Partially tighten the 3/8" x 4" Screws (7) until
the heads of the Screws touch the Right Upright
(85);
do not fully tighten the Screws yet.
Partially tighten the 3/8" x 1 1/2" Screw (14).
95
85
87
11
11
14
7
4
5.
With the help of a second person, lift the tread-
mill so that the Base (95) is flat on the floor.
Attach a Wheel (96) to the Base (95) with a 3/8"
x 2" Bolt (8) and a 3/8" Nut (10).
Do not over-
tighten the Nut; the Wheel must turn freely.
Press a Base Cap (89) into the Base (95).
5
8
95
10
89
96