ProForm 450 Cx Treadmill User Manual - Page 9

6. Pull the indicated wire until the Upright Wire (28) 6 is extending from the upper end of the Right Upright (36). Then, disconnect and discard the wire. Remove the elastic bands from the Left and Right Base Leg Covers (101, 102) and press them onto the Base (48) as shown. 101 Wire 28 36 102 48 7. Identify the Right Handrail Endcap (91), which does not have a cutout in the bottom, and slide it onto the lower end of the Right Handrail (11). Make sure that the screw hole in the Right Handrail Endcap is at the bottom. Next, hold the Right Handrail near the Right Upright (36), and insert the Upright Wire (28) into the hole in the bottom of the Right Handrail and out of the indicated hole in the top. Then, remove the tie from the Upright Wire. Set the Right Handrail (11) on the Right Upright (36) while sliding the lower end of the Right Handrail onto the bracket on the Right Upright. Hand tighten two Handrail Bolts (20) with two Handrail Star Washers (19) into the Right Handrail and the Right Upright. Next, slide the Right Handrail Endcap (91) against the Right Upright, and tighten an Endcap Screw (95) into the Right Handrail Endcap. Then, tighten the two Handrail Bolts. Make sure that the Upright Wire (28) is not pinched. Attach the Left Handrail (18) and the Left Handrail Endcap (90) to the Left Upright (31) as described above. 7 20 18 19 Cutout 90 95 28 31 20 19 11 36 91 95 9