ProForm 470 Cx Treadmill Uk Manual - Page 17

HOW TO CONNECT YOUR COMPUTER HOW TO CONNECT YOUR VCR A. Plug one end of a long 3.5mm to 3.5mm stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the LINE OUT jack on your computer. Note: While the cable is plugged into the LINE OUT jack, do not plug your headphones into the headphone jack on the console. A LINE OUT Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 16. A. Plug one end of a long 3.5mm to RCA stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the AUDIO OUT jack on your VCR. A Audio Cable ANT. IN VIDEO AUDIO IN CH 34 OUT RF OUT AUDIO OUT RIGHT LEFT A Audio Cable ANT. IN VIDEO AUDIO IN CH 34 OUT RF OUT AUDIO OUT RIGHT A LEFT B. Plug one end of a long 3.5mm to RCA stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into an RCA Y-Adaptor (available at electronics stores). Next, remove the wire that isVIDEOAUDIO currently ANT.IN IN RF OUT CH 34 plugged into the AUDIO OUT jack onOUT your VCR and plug the wire into the unused side of the Y-Adaptor. A Plug the Y-Adaptor into the AUDIO OUT jack on your VCR. B ANT. IN VIDEO AUDIO IN CH 34 OUT RF OUT B Audio Cable RCA Y-Adaptor Wire removed from AUDIO OUT jack B 17