ProForm 480 Cse Elliptical English Manual - Page 8

5. The Console (10) can use four 1.5V "D" batteries (not included); alkaline batteries are rec- 5 ommended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other elec- tronic components. Remove the battery cover, insert the batteries into the battery compartment, and reattach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compart- ment. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturersupplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Cover Batteries 10 6. While another person holds the Console (10) near the Upright (2), connect the console wire 6 to the Upper Wire Harness (51). Tip: Avoid pinching the wires. Attach the Console (10) to the Upright (2) with four M4 x 16mm Screws (84). 10 Console Wire 2 51 Avoid pinching the wires 84 8