ProForm 500 Le Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver wrench , and a rubber mallet . , an adjustable Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do not use power tools for assembly. M4 Split Washer (112)-8 M4 Washer (102)-8 M8 Split Washer (90)-3 Wave Washer (111)-2 M8 Washer (88)-6 M8 Jam Nut M10 Locknut (79)-7 (81)-2 M4 x 16mm Blunt Screw (104)-8 M4 x 16mm Round Head Screw (101)-10 M4 x 32mm Round Head Screw (105)-6 M4 x 50mm Screw (108)-2 Hub Patch Screw (87)-8 M8 x 23mm Shoulder M8 x 23mm Button Patch Screw (115)-4 Patch Screw (84)-4 M8 x 41mm Button Bolt (78)-4 M8 x 69mm Button Bolt (80)-1 M8 x 80mm Patch Bolt (116)-2 M10 x 80mm Carriage Bolt (82)-2 M10 x 127mm Patch Screw (83)-2 5