ProForm 520 Zlt Treadmill Uk Manual - Page 9

5. Identify the Right Handrail (64), which is marked "Right." 5 Remove the 5/16" x 3/4" Screw (5) and the 5/16" Star Washer (6) from the Right Handrail (64). Note: The Screw and the Star Washer will be used in step 6. Repeat this step for the Left Handrail (not shown). 6. Have a second person hold the Right Handrail (64) near the Right Upright (76). 6 Route the Upright Wire (63) into the bottom of the Right Handrail (64) and out of the hole in the Right Handrail.  Be careful not to pinch the Upright Wire (63). Insert and partially tighten a 5/16" x 3/4" Screw (5) with a 5/16" Star Washer (6) into the Right Upright (76) and the Right Handrail (64). Do not fully tighten the Screw yet. Then, partially tighten a 5/16" x 3" Screw (7) with a 5/16" Star Washer (6) into the Right Handrail (64) and the Right Upright (76). Do not fully tighten the Screw yet. Attach the Left Handrail (not shown) in the same way. Note: There are no wires on the left side. 5 6 64 7 6 64 6 5 63 76 7. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the two Screws (C) from the Console Crossbar (61). Remove the Console Crossbar. Discard the Screws. 7 C 61 C Console Assembly 9