ProForm 525 Zlt Treadmill Uk Manual - Page 10
If You Do Not Connect The Con, Become Damaged When You Turn
View all ProForm 525 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Hold the Handrails (59, 64) near the Uprights (66, 76). Route the Upright Wire (63) into the bottom of the Right Handrail (64) and out of the hole in the side of the Right Handrail. Set the Handrails (59, 64) on the Uprights (66, 76). Be careful not to pinch the Upright Wire (63). Partially tighten four 5/16" x 3 1/4" Screws (78) with four 5/16" Star Washers (6) through the Handrails and into the Uprights. Start all four Screws, and then tighten them. Tighten the four 1/4" x 1 1/4" Screws (77). 7 78 6 77 59 78 66 6 63 64 77 76 8. With the help of a second person, hold the console assembly near the Right Handrail (64). See the inset drawing. Connect the Upright Wire (63) to the console wire. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. 8 Console Assembly Console Wire 64 63 Wire Tie Console Wire 63 10