ProForm 600 Uk Manual - Page 17
The Information Mode/demo Mode
View all ProForm 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
8 Follow your progress with the LED track and the four displays. See step 5 on page 10. 9 Measure your pulse, if desired. See step 6 on page 11. 10 When the program is finished, remove the key. Step onto the foot rails and remove the key from the console. Keep the key in a secure place. Note: If the displays and various indicators on the console remain lit after the key is removed, the console is in the "demo" mode. Refer to the instructions below and turn off the demo mode. When you are finished using the treadmill, move the on/off switch near the power cord to the off position. THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometres per hour. In addition, the information mode allows you to turn on and turn off the demo mode. To select the information mode, hold down the stop button while inserting the key into the console. When the information mode is selected, the following information will be shown: The distance/laps display will show the total number of miles that the walking belt has moved. The time/incline display will show the total number of hours the treadmill has been used. IMPORTANT: The calories/fat calories/pulse display should be blank. If a "d" appears in the display, the console is in the "demo" mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a "d" appears in the calories/fat calories/pulse display when the information mode is selected, press the speed t button so the calories/fat calories/pulse display is blank. To exit the information mode, remove the key from the console. OPTIONAL HAND WEIGHTS Optional hand weights let you include upperbody exercise in your workouts. The hand weights fit into convenience holders in the console. To purchase the hand weights, contact our Customer Service Department. at 0345-089009. OPTIONAL CHEST PULSE SENSOR An optional chest pulse sensor adds even more features to the console. The chest pulse sensor offers hands-free operation and continuously monitors your heart rate during your workouts. To purchase the optional chest pulse sensor contact our Customer Service Department at 0345-089009. An "E," for english miles, or an "M," for metric kilometres, will appear in the speed/min-mile display. Press the speed s button to change the unit of measurement. 17