ProForm 640s Uk Manual - Page 4

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable spanner , and a rubber mallet . As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. M10 Nylon Locknut (29)-6 M10 Split Washer (70)-4 M10 Small Washer (53)-2 M10 Large Washer (38)-4 M8 x 19mm Button Screw (22)-2 M10 x 27mm Screw (71)-3 M4 x 16mm Screw (66)-2 M4 x 19mm Flange Screw (17)-6 M10 x 92mm Button Bolt (27)-2 Frame Spacer (19)-1 M10 x 88mm Button Bolt (63)-1 M10 x 112mm Carriage Bolt (34)-4 4