ProForm 660 Weight Bench English Manual - Page 9
Attach the Joiner Bracket 27 to the Right Base 25
View all ProForm 660 Weight Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
11. Press a 2Ó Square Inner Cap (17) into the indicated 11 ends of the Right and Left Base (25, 26). 25 17 26 17 12. Attach the Joiner Bracket (27) to the Right Base (25) with two M10 x 65mm Bolts (5), four M10 Washers 12 (6) and two M10 Nylon Locknuts (1). Do not tighten the Nylon Locknuts yet. 1 6 Attach the Left Base (26) to the Joiner Bracket (27) with two M10 x 65mm Bolts (5), four M10 Washers (6) and two M10 Nylon Locknuts (1). Do not tighten 1 6 the Nylon Locknuts yet. 27 6 26 5 25 6 5 9
9
12. Attach the Joiner Bracket (27) to the Right Base (25)
with two M10 x 65mm Bolts (5), four M10 Washers
(6) and two M10 Nylon Locknuts (1).
Do not tighten
the Nylon Locknuts yet.
Attach the Left Base (26) to the Joiner Bracket (27)
with two M10 x 65mm Bolts (5), four M10 Washers
(6) and two M10 Nylon Locknuts (1).
Do not tighten
the Nylon Locknuts yet.
12
11. Press a 2° Square Inner Cap (17) into the indicated
ends of the Right and Left Base (25, 26).
11
6
5
5
6
26
17
25
27
6
6
1
1
25
17
26