ProForm 680 Mrt Treadmill Men Manual - Page 10
Bolt 5, and M10 Star Washer 8.
View all ProForm 680 Mrt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. Hold a Bolt Spacer (79) inside the lower end of the Left Upright (73). Insert an M10 x 96mm Bolt 8 (5) with an M10 Star Washer (8) into the Left 5 73 Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (79), M10 x 96mm Bolt (5), and M10 Star Washer (8). 8 Orient the Left Upright Spacer (83) and the Left Upright (73) as shown. Hold the Left Upright Spacer and the Left Upright against the Base (85). Tighten the M10 x 96mm Bolts (5) until the heads of the Bolts touch the Upright; do not fully tighten the Bolts yet. 79 83 85 9. Press a Base Cap (82) into the Base (85). With the help of a second person, tip the treadmill so that the Base (85) is flat on the floor. 9 82 85 10. Attach the Dumbbell Rack (100) to the Uprights (73, 78) with four 1/4" x 3/4" Bolts (98) and four 1/4" Star Washers (99); do not fully tighten the 10 99 98 Bolts yet. 100 99 98 73 98 78 99 98 99 10