ProForm 715 Smr Bike Uk Manual - Page 5
Insert the Handlebar 15 into the Upright 13. Attach
 |
View all ProForm 715 Smr Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3. Whilst another person holds the Upright (13) in the position shown, connect the Upper Wire Harness (36) 3 to the Lower Wire Harness (55). Carefully pull the excess Upper Wire Harness (36) out of the top of the Upright (13), and insert the Upright into the Frame. Be careful to avoid pinching the Wire Harnesses. Next, attach the Upright with three M8 x 15mm Screws (45), three M8 Lock Washers (54), and three M8 Curved Washers (41). Be careful to avoid pinching the wire harnesses whilst inserting the Upright. 4. Insert the Handlebar (15) into the Upright (13). Attach the Handlebar to the Upright with two 3/8" x 38mm Bolts (50) and two 3/8" Nylon Locknuts (33). 13 41 45 54 4 36 54 55 45 41 41 54 45 1 15 33 33 50 13 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
-
13
-
14
-
15
-
16
 |
 |
5
3
55
54
41
54
41
41
54
45
45
45
1
13
36
3.
Whilst another person holds the Upright (13) in the
position shown, connect the Upper Wire Harness (36)
to the Lower Wire Harness (55).
Carefully pull the excess Upper Wire Harness (36) out
of the top of the Upright (13), and insert the Upright into
the Frame.
Be careful to avoid pinching the Wire
Harnesses.
Next, attach the Upright with three M8 x
15mm Screws (45), three M8 Lock Washers (54), and
three M8 Curved Washers (41).
Be careful to avoid
pinching the wire
harnesses whilst
inserting the
Upright.
4
4.
Insert the Handlebar (15) into the Upright (13). Attach
the Handlebar to the Upright with two 3/8” x 38mm
Bolts (50) and two 3/8” Nylon Locknuts (33).
13
15
33
50
33