ProForm 730 Treadmill English Manual - Page 11

HOW TO USE THE MANUAL MODE 1 Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 10. 2 Select the manual mode. When the key is in- serted, the manual mode will be Track selected. If a program has been selected, reselect the manual mode by pressing the Programs button repeatedly until a track appears in the lower part of the display. 3 Start the walking belt. To start the walking belt, press the Start button, the Speed + button, or one of the ten numbered buttons. If the Start button or the Speed + button is pressed, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed + and - buttons. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. Note: After the buttons are pressed, it may take a moment for the walking belt to reach the selected speed setting. If one of the ten numbered buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed setting. To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button, the Speed + button, or one of the ten numbered buttons. Note: The first time the treadmill is used, observe the alignment of the walking belt, and align the walking belt if necessary (see page 25). 4 Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase and decrease buttons. Each time a button is pressed, the incline will change by 0.5%. Note: After the buttons are pressed, it may take a moment for the treadmill to reach the selected incline setting. 5 Follow your progress with the displays. When the manual mode or the iFIT.com mode is se- Track lected, the lower part of the display will show a 1/4-mile track. As you walk or run, the indicators around the track will appear in succession until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession. The left side of the display will show the elapsed time and the distance that you have walked or run. (Note: When a program is selected [except for pulse program P 8], the display will show the time remaining in the program instead of the elapsed time.) The left side of the display will also show the incline level of the treadmill. The right side of the display will show your pace (in minutes per mile) and the speed of the walking belt. In addition, the right side of the display will show the approximate number of calories you have burned. When you use the handgrip pulse sensor or the optional chest pulse sensor, the right side of the display will also show your heart rate. 11