ProForm 755 Crosstrainer Treadmill English Manual - Page 16

Use A Custom Program

Get ProForm 755 Crosstrainer Treadmill PDF manuals and user guides View all ProForm 755 Crosstrainer Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

HOW TO CREATE A CUSTOM PROGRAM 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. 2. Select one of the custom programs. To select a custom program, press the Custom Programs button once or twice, until "P10" or "P11" appears in the display. Note: If the custom program has not yet been defined, only three columns of indicators will scroll across the matrix. If more than three columns of indicators appear, see HOW TO USE A CUSTOM PROGRAM on page 17. 3. Press the Start button and program the desired speed and incline settings. A moment after the button is pressed, the walking belt will begin to move. Hold the handrails and begin walking. See the matrix in the display. Each custom program is divided into Current Segment one-minute segments. One speed setting and one incline setting can be programmed for each segment. The speed setting for the first segment will be shown in the flashing current segment column of the matrix. (The incline settings are not shown in the matrix.) To program a speed setting and an incline setting for the first segment, simply adjust the speed and incline of the treadmill as desired by pressing the Speed and Incline buttons. Every few times a Speed button is pressed, an additional indicator will appear or disappear in the current segment column. When the first segment of the program ends, the current speed setting and the current incline setting will be saved in memory. The three columns of indicators will then move one column to the left, and the speed setting for the second segment will be shown in the flashing current segment column. Program a speed setting and an incline setting for the second segment as described above. Continue programming speed and incline settings for as many segments as desired; custom programs can have up to forty segments. When you are finished with your workout, press the Stop button twice. The speed and incline settings that you have programmed and the number of segments that you have programmed will then be saved in memory. 4. When you are finished exercising, remove the key from the console. See step 8 on page 13. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
16
HOW TO CREATE A CUSTOM PROGRAM
1.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
12.
2.
Select one of the custom programs.
To select a
custom pro-
gram, press
the Custom
Programs
button once
or twice, until
“P10” or “P11”
appears in the
display.
Note: If the custom program has not yet been
defined, only three columns of indicators will
scroll across the matrix. If more than three
columns of indicators appear, see HOW TO
USE A CUSTOM PROGRAM on page 17.
3.
Press the Start button and program the desired
speed and incline settings.
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.
See the ma-
trix in the dis-
play. Each
custom pro-
gram is di-
vided into
one-minute segments. One speed setting and one
incline setting can be programmed for each seg-
ment. The speed setting for the first segment will
be shown in the flashing current segment column
of the matrix. (The incline settings are not shown in
the matrix.) To program a speed setting and an in-
cline setting for the first segment, simply adjust the
speed and incline of the treadmill as desired by
pressing the Speed and Incline buttons. Every few
times a Speed button is pressed, an additional indi-
cator will appear or disappear in the current seg-
ment column.
When the first segment of the program ends, the
current speed setting and the current incline setting
will be saved in memory.
The three columns of in-
dicators will then move one column to the left,
and
the speed setting for the second segment will be
shown in the flashing current segment column.
Program a speed setting and an incline setting for
the second segment as described above.
Continue programming speed and incline settings
for as many segments as desired; custom pro-
grams can have up to forty segments. When you
are finished with your workout, press the Stop but-
ton twice. The speed and incline settings that you
have programmed and the number of segments
that you have programmed will then be saved in
memory.
4.
When you are finished exercising, remove the
key from the console.
See step 8 on page 13.
Current Segment