ProForm 755 Ekg Bike Uk Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable spanner screwdriver . and Phillips Use the drawings below to identify the small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 22. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. M8 Split Washer (50)-7 M8 Nylon Locknut (65)-4 M10 Nylon Locknut (63)-4 M4 x 16mm Screw (57)-4 M6 x 8mm Screw (58)-2 M8 x 25mm Button Screw (51)-2 M8 x 90mm Button Screw (41)-1 M10 x 112mm Carriage Bolt (43)-4 1. Attach the Rear Stabiliser (16) to the Frame (1) with two M10 x 112mm Carriage Bolts (43) and two M10 Nylon Locknuts (63). 1 43 16 1 63 5