ProForm 785s Elliptical English Manual - Page 4

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrenches and your own phillips screwdriver and rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify the small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 21. The number following the parentheses is the quantity used in assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it is preassembled. M4 x 16mm M4 x 16mm Round Head Screw (94)-8 Screw (69)-1 M8 Jam Nut (97)-6 M10 Nylon Locknut (89)-2 M10 Split Washer (73)-6 M10 Washer (20)-2 M8 x 44mm Button Screw (84)-4 M8 x 41mm Button Bolt (98)-6 M10 x 55mm Carriage Bolt (83)-2 M10 x 20mm Button Screw (49)-6 M10 x 90mm Carriage Bolt (96)-2 Bolt Set (65)-2 1. Identify the Front Stabilizer (8). While another person lifts the front of the Frame (1), attach the Front 1 Stabilizer to the Frame with two M10 x 90mm Carriage Bolts (96) and two M10 Nylon Locknuts (89). 89 1 96 8 4