ProForm 835 S Elliptical English Manual - Page 6

5. Attach the Water Bottle Holder (70) to the Upright (2) 5 with two M4 x 16mm Screws (94). 2 70 94 6. Apply grease to the long side of a Bolt Set (65). Have a second person hold the lower end of the left Upper Body Arm (29) inside of the bracket on the Left Pedal Leg (4). Attach the left Upper Body Arm to the Left Pedal Leg with the Bolt Set. Identify the Left Pedal (10). Attach the Left Pedal to the Left Pedal Leg (4) with an M10 x 55mm Carriage Bolt (83), an M10 Washer (20), and an Adjustment Knob (72). Note: The slot in the Left Pedal Leg allows the Left Pedal to be positioned as desired. Repeat this step on the right side of the elliptical exerciser. Regularly tighten both Adjustment Knobs (72). See step 3. Tighten the six M10 x 20mm Button Screws (49). 7. The Console (17) requires four "D" batteries (not included); alkaline batteries are recommended. Remove the two battery covers from the Console. Next, insert four batteries into the battery compartment. Make sure that the batteries are oriented as shown by the diagrams inside of the battery compartments. Then, reattach the battery covers to the Console. Attach the Book Rack (77) to the Console (17) with two M4 x 16mm Screws (94) as shown. 6 72 29 20 10 65 65 Grease 4 83 7 Battery Covers 77 94 Batteries 17 6