ProForm 905 Zlt Treadmill English Manual - Page 8
Attach the Pivot Cover 12 to the Handlebar 5
View all ProForm 905 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
6. While another person holds the Console (13) near the Handlebar (5), connect the console 6 wires to the Extension Wire (59) and the Pulse Wire (61). Insert the excess wire downward into the Handlebar (5) or upward into the Console (13). Tip: Avoid pinching the wires. Attach the Console (13) to the Handlebar (5) with four M4 x 16mm Screws (90). Console Wires 59 Avoid pinching the wires 13 61 5 90 7. Orient the Upright (4) assembly and the Pivot Cover (12) as shown. Slide the Pivot Cover (12) upward to the Handlebar (5). Tip: Bend and flex the Pivot Cover slightly to slide it over the Handlebar. Attach the Pivot Cover (12) to the Handlebar (5) with two M4 x 16mm Screws (90) and two M4 x 22mm Screws (94). Pivot the Handlebar (5) until the hole in the Handlebar is aligned with an adjustment hole in the Upright (4). Tighten an Adjustment Knob (27) into the Handlebar (5) and an adjustment hole in the Upright (4). Make sure that the Adjustment Knob is engaged in one of the adjustment holes. 7 Hole Adjustment Holes 90 27 4 5 94 12 94 90 8