ProForm 940s Bike User Manual - Page 13
Part List-model No. Pfccex31900
View all ProForm 940s Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HOW TO ADJUST THE BELT The exercise cycle features a precision Belt (16) that must be kept properly adjusted. If the Belt causes excessive noise or slips as you pedal, the Belt should be checked. To do this, the left side shield must first be removed. Refer to 16 the instructions on page 12 and remove the left side shield. Next, use an adjustable wrench to turn the right pedal counterclockwise and remove it. Remove the right side shield. Press down on the center of the Belt (16) between the front and rear sprockets. There should be from 1/4" to 3/4" (6mm to 19mm) of vertical movement in the center of the Belt. If the Belt (16) is properly adjusted, reattach the side 16 shields and pedals. If the Belt needs to 32 be adjusted, loosen the M8 Washer Nut (37) on each side of 47 the Flywheel (32). To tighten the Belt, 37 turn the two M6 Stop Nuts (47) clockwise; to loosen the belt, turn the Nuts counter- clockwise. Make sure that the Flywheel is straight and tighten the M8 Washer Nuts (37). Reattach the side shields and pedals. PART LIST-Model No. PFCCEX31900 R0500A Key No. Qty. 1 1 2 1 3 2 4 4 5 1 6 2 7 1 8 5 9 8 10 1 11 1 12 3 13 1 14 1 15 1 16 1 17 1 18 1 19 1 20 1 21 9 22 1 23 1 24 2 25 2 26 2 27 2 28 1 29 1 30 4 31 1 32 1 Description Left Side Shield Right Side Shield Double Tree Fastener M4 x 12mm Console Screw Handlebar Foam Grip Console M10 x 25mm Button Screw M4 x 16mm Screw Resistance Knob Resistance Control/Cable M5 x 30mm Screw Right Pedal Handlebar Post Frame Belt Front Stabilizer Rear Stabilizer Seat Seat Post M8 Nylon Locknut 25.4mm x 63.5mm Bushing Seat Post Bushing Wheel Hub Wheel Wheel Spacer M6 x 16mm Self-tapping Screw Left Pedal Seat Knob M8 x 90mm Carriage Bolt M10 Flat Washer Flywheel 33 1 Crank/Pulley 34 3 M4 x 38mm Self-tapping Screw 35 1 Flywheel Spacer 36 1 Flywheel Axle 37 2 M8 Washer Nut 38 2 M6 Eye Bolt 39 2 Adjustment Bracket 40 1 Side Shield Cover 41 7 M10 Split Washer 42 1 Bearing Assembly 43 1 "C" Magnet Spring 44 2 Stabilizer Endcap 45 1 "C" Magnet 46 1 M6 x 64mm Bolt 47 4 M6 Stop Nut 48 1 M8 x 62mm Bolt 49 4 M8 Split Washer 50 1 Reed Switch/Wire 51 1 Magnet 52 2 Pulse Grip 53 1 Clamp Bolt 54 4 1/4" Flat Washer 55 1 "S" Hook 56 1 Clamp Nut 57 1 Reed Switch Clamp 58 1 Right Pedal Strap 59 1 Left Pedal Strap 60 2 Pulse Grip Wire 61 3 M5 Nut # 1 Allen Wrench # 1 User's Manual Note: "#" indicates a non-illustrated part. Specifications are subject to change without notice. 13