ProForm 980 Cs Treadmill English Manual - Page 8

4. Hold a Bolt Spacer (77) inside the lower end of the Right Upright (78). Next, insert a 3/8" x 4 4 1/2" Bolt (6) with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (77), 3/8" x 4 1/2" Bolt (6), and 3/8" Star Washer (9). Then, set the Right Upright in the Right Upright Spacer (79). Be careful not to pinch the Upright Wire (38). Partially tighten the 3/8" x 4 1/2" Bolts (6); do not fully tighten the Bolts yet. 6 78 9 79 38 77 5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so the treadmill is more stable; do not fully fold the Frame yet. Attach a Base Foot (81) to the Base (83) in the location shown with a #8 x 1" Tek Screw (2) and a Base Foot Spacer (13). Then, attach another Base Foot (81) with only a #8 x 1" Tek Screw (2). Attach a Wheel (84) to the Base (83) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Do not overtighten the Nut; the Wheel must turn freely. 5 81 2 6. Set the Left Upright Spacer (76) on the Base (83). Have a second person hold the Left Upright (74) near the Base. Hold a Bolt Spacer (77) inside the lower end of the Left Upright. Next, insert a 3/8" x 4 1/2" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (77), 3/8" x 4 1/2" Bolt (6), and 3/8" Star Washer (9). Then, set the Left Upright in the Left Upright Spacer. Partially tighten the 3/8" x 4 1/2" Bolts (6); do not fully tighten the Bolts yet. With the help of a second person, tip the treadmill so that the Base (83) is flat on the floor. 6 6 9 77 83 56 4 13 2 81 84 8 74 76 83 8