ProForm 990 X Treadmill English Manual - Page 6
Assembly
View all ProForm 990 X Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex key and your own phillips screwdriver shaft at least 6" long) and wire cutters . (with a Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled. Extension Leg Nut (67)-4 Star Washer (8)-4 3/4" Screw (3)-12 1" Tek Screw (22)-4 Console Bolt (64)-4 Extension Leg Bolt (65)-4 1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (58) so the treadmill is more stable. Do not fully fold the Frame until the treadmill is completely assembled. See drawing 1a. You must attach the right and left Extension Legs (89) on the correct sides of the treadmill. The head of one Wheel Bolt (81) must be on the right side of the right Extension Leg, and the head of the other Wheel Bolt must be on the left side of the left Extension Leg. Note: If the heads of both Wheel Bolts (81) are on the same sides of both Extension Legs (89), you must remove one of the Wheel Bolts and insert it from the opposite side. Insert the right Extension Leg into the base of the Uprights (84) as shown. Next, hold two Extension Leg Nuts (67) in the bottom of the Extension Leg. Insert two Extension Leg Bolts (65) into the top of the Extension Leg, and firmly tighten the Extension Leg Bolts into the Extension Leg Nuts. 6 1 65 84 89 67 58 1a Left Extension Leg (89) 81 Right Extension Leg 81 (89)