ProForm Cs19e Treadmill English Manual - Page 24
How To Adjust The Cushioning System
View all ProForm Cs19e Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
HOW TO ADJUST THE CUSHIONING SYSTEM The treadmill fea- tures a cushioning system that re- duces the impact as you walk or run on the treadmill. To increase the firmness of the Adjustment walking platform, Knob turn the adjust- ment knob coun- terclockwise. To decrease the firmness, turn the knob clockwise. Note: The faster you run on the treadmill, or the more you weigh, the firmer the walking plat- form should be. THE OPTIONAL CHEST PULSE SENSOR An optional chest pulse sensor provides hands-free operation and allows you to use the console's heart rate programs. To purchase the optional chest pulse sensor, call toll-free 1-800-734-2377. If you purchase the optional chest pulse sensor, follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated Screw (40) and the Access Door (76). 116 101 A Cylinder 76 40 2. Remove the paper from the adhesive pad on the back of the receiver (A). Orient the receiver so the small cylinder is near the lower edge of the receiver and is facing the Console Back (116) as shown. Firmly press the receiver onto the indicated corner of the Access Door (76). Connect the wire on the receiver to the Pulse Wire (101) extending from the Console Back. 3. Make sure that no wires are pinched. Reattach the Access Door (76) with the Screw (40). Note: The other wires included with the receiver may be discarded. 24