ProForm Endurance 520 E Instruction Manual - Page 24

HOW TO CHANGE CONSOLE SETTINGS 1. Select the settings mode. To select the settings mode, press the gear button. The settings information will appear in the display. 2. Navigate the settings mode. While the settings mode is selected, the matrix of the display will display several optional screens. Press the decrease button next to the Enter button repeatedly to select the desired optional screen.  Contrast Level-The currently selected contrast level will appear in the display. Press the Quick Resistance increase and decrease buttons to adjust the contrast level.  Usage Information-The display will show the total number of hours that the elliptical has been used and the total distance (in miles or kilometers) that has been pedaled on the elliptical. 4. Exit the settings mode. Press the gear button to exit the settings mode. The lower section of the display will show instructions for the selected screen. Make sure to follow the instructions shown in the lower part of the display. 3. Change settings as desired.  Units-The currently selected unit of measurement will appear in the display. To change the unit of measurement, press the Enter button repeatedly. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. 24