ProForm Endurance S7 Treadmill Uk Manual - Page 11
If You Do Not Connect The Con, Become Damaged When You Turn
View all ProForm Endurance S7 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. With the help of a second person, hold the console assembly near the Right Handrail (84) and the Left Handrail (not shown). See the inset drawing. Connect the Upright Wire (81) to the console wire. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. 8 Console Assembly Console Wire 84 81 Wire Tie Console Wire 81 9. Set the console assembly on the Right and Left Handrails (84, 85). Make sure that no wires 9 are pinched. Insert the excess Upright Wire (81) into the Right Upright (90). Attach the console assembly to the brackets on the Handrails (84, 85) with the four 1/4" x 1/2" Screws (2) that you removed in step 7 and four 1/4" Star Washers (26). Do not tighten the Screws yet. Console Assembly 84 26 81 2 90 85 26 2 11