ProForm Performance 1050 Instruction Manual - Page 24

 MODULE-If an iFit module is connected, the display will show the word WIFI. If a USB module is connected, the display will show the word USB/SD. TRAINER VOICE-To turn on or turn off the audio coach, press the Enter button. If an iFit module is connected, you may also select the following screens:  START MODE-The start mode will appear when you insert the key into the console. Press the Enter button to select the manual mode or the iFit mode as the start mode. the network SSID, the network encryption type, the wireless signal strength, the IP address of the module, the number of registered users and their names, and the results of the DNS lookup. To return to the information mode, remove the key from the console and repeat the instructions near the beginning of this page.  SEND/OBTAIN DATA-To send and receive workouts, workout logs, and updates, press the Enter button. When the process is finished, the words TRANSFERS DONE will appear in the display. 3. Exit the information mode.  CHECK WIFI-Press the Enter button. The center display will show the software version number, To exit the information mode, remove the key from the console. 24