ProForm Performance 600 C Treadmill English Manual - Page 7
Assembly
View all ProForm Performance 600 C Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • To hire a service technician to assemble this product in your home, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • Assembly requires the following tools: the included hex keys an adjustable wrench one Phillips screwdriver scissors To avoid damaging parts, do not use power tools. 1. Make sure that the power cord is unplugged. 1 Pull the Upright Wire (78) and the base ground wire (A) through the indicated hole in the Base (95). If there is a screw (B) preinstalled in the side of the Base (95), remove and discard it. Attach the ground wire (A) to the Base with a #8 x 1/2" Silver Screw (9). Press the Grommet (90) into the square hole in the Base (95). Hole 78 9 90 B A 95 7