ProForm Power 995i Instruction Manual - Page 8
Make sure that the power cord is unplugged., See the inset drawing., Make sure not to pinch,
View all ProForm Power 995i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (81) to the front of the Base (94). Next, identify the Right Upright (90). Have a second person hold the Right Upright near the Base (94). See the inset drawing. Tie the wire tie (A) in the Right Upright (90) securely around the end of the Upright Wire (81). Then, insert the Upright Wire into the lower end of the Right Upright as you pull the other end of the wire tie through the Right Upright. 2 81 A 81 90 A 90 3. Lay the Right Upright (90) near the Base (94). Press the Grommet (77) into the square hole (B) 3 in the Right Upright. Make sure not to pinch the ground wire (C). Next, remove and discard the indicated screw (D). Then, attach the ground wire to the Right Upright (90) with a #8 x 1/2" Silver Screw (10). 94 94 10 77 C BD 90 8