ProForm Pro 2000 Treadmill English Manual - Page 12
If You Do Not Connect The Con
View all ProForm Pro 2000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12. With the help of a second person, hold the console assembly near the Uprights (90, 99). Connect the Upright Wire (88) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Next, connect the two pulse wires. Then, remove the wire tie from the Upright Wire (88). 12 Console Assembly Pulse Wires Pulse Bar Assembly 99 Wire Tie 88 90 Console Wire Console Wire 88 13. Insert the pulse wires and the Upright Wire (not shown) into the Handrails (92, 93) as you set 13 the console assembly on the Handrails. Attach the console assembly with the four 5/16" x 5/8" Screws (4) and four 5/16" Star Washers 92 (12) that you removed in step 11. Start all four Screws, and then tighten them. 93 Tighten the four 3/8" x 1" Screws (6). 12 Console 12 4 6 Assembly 4 6 12